This robot is called Dreame Bot W10. This device in addition to the side and central brush is prepared with two rotating platforms with round mopping pads. They not only wipe dirt from the floor better, but are also able to mechanically self clean and wet at a special station. This station has two separate tanks for clean and dirty water. During cleaning Dreame Bot W10 makes transitional arrivals at the station to rinse the mopping pads and continue cleaning with clean, richly moistened ones.
Package
The robot vacuum cleaner came in such a large branded box. In the box, in addition to the robot itself and the station, there is:
- Side brush to be installed on the robot.
- Two removable mops which also come in one set.
- Power adapter to connect the station to the network.
- Robot cleaning tool.
- And an instruction manual translated into several languages.
Read More: Dominate summer cleansing with the “Roborock S7 MaxV” vacuum
Design
Let’s have a look at how the Dreame Bot W10 is designed. Let’s start the review with the robot vacuum cleaner itself. The body shape is closer to D-shaped, but with rounded corners. There are charging terminals on the back that connect the robot to the base.
On the right side there is a wall sensor in the center on the mechanical bumper there is a sensor for detecting obstacles in the path of the robot. Unfortunately, there is no object detection system like the Dreame Z10 pro and L10 pro. The body height is about 10.5 cm. this is 1cm higher robots due to the reorganized cleaning module.
On the control panel we see three mechanical control buttons start/pause forced return to the base for charging and local cleaning mode. Lidar is conscientious for navigation. It is equipped with a spring loaded cover that prevents it from getting stuck under furniture. The dust container is located under the top cover. A protective shutter is installed inside to prevent accidental spillage of litter when removing the container. The container itself holds up to 450 ml of dry waste. Filtration system based on mesh and HEPA filter.
There are 6 fall defense sensors along the perimeter. An ultrasonic along for detecting carpets is located in front near the swivel roller. Dreame factory engineers made the central brush elongated. It is still stubbly petal. On both sides it is disassembled for cleaning from wound hair and wool. The brush block is floating which permits it to better cuddle up to different floor coverings. Behind the block with a turbo brush we see seats for installing platforms with mopping pads. They are equipped with magnets which make attaching mopping pads as simple and expedient as possible. Another roller is installed behind the cleaning module. Of course it is much needed here. Unfortunately the wipes do not go beyond the edges of the case so it is apparent that the robot will not be able to wash the floor close to the plinth or furniture. A narrow grubby strip will perceptibly remain. On the top of the case there is an exhibit with two touch buttons start/stop the cleaning process and forced return to the station. The exhibit shows the battery charge and service messages.
Read More: Realme tech life hand held vacuum cleaner, robot vacuum-mop and air purifier
Specifications
The main characteristics of Dreame Bot W10 declared by the manufacturer are displayed on the screen:
- Battery Li-Lon 6400 mAh.
- Suction power up to 4000 pa.
- Operating time >120 min.
- Cleaning area up to 300 sq.m.
- Capacity of a dust collector is 450 ml.
- Capacity of tanks for dirty and clean water in the station: 41+41.
- Passage of obstacles up to 20 mm.
- Robot dimensions: 334*314*105.5 mm.
- Station dimensions: 375*400*430 mm.
Functionality
A global version of the robot vacuum cleaner came to me for review. There were no connection problems. At the first start a notification appeared about the need to update the firmware. On the main working panel it builds a map of the area and automatically zones it into rooms. Three main modes of operation are displayed under the map. In room mode, you can select the desired rooms for cleaning and the order in which they are cleaned. In automatic mode the robot vacuum cleaner cleans the entire obtainable area with a snake moves. In the station settings you can choose the regularity of rinsing mopping pads during the cleaning process. In this case the robot will rinse the mopping pads before each new cleaning area. Well, the setting segment contains the main functions of the robot vacuum cleaner. To begin with, it is proposed to regulate the volume of voice alerts and select the preferred language.
Read more: Neato D9 Robot Vacuum Cleaner review
Conclusion
The function of rising mopping pads at the station moreover the station very efficiently copes with its main task. You can athletically regulate the frequency of rinsing mopping pads. For example the same self-cleaning sweeping, mopping robot is programmed to rinse mopping pads severely every 10 sq.m meters of cleaning which is not very practical and expedient Ease of operation of the station. Here we are talking about a removable platform for washing mopping pads. It has a good navigation. High quality dry and wet cleaning the Dreame Bot W10 has an effectual cleaning module and moreover the robot sweeps better in corners. Global model is provided consequently voice messages in numerous languages are supported and there is a translation of the instructions.
